Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 alle Jahre

Ammon, W.v.; Gelfgat, Y.; Gorbunov, A.; Mühlbauer, A.; Muiznieks, Y.; Makarov, Y.; Virbulis, J.; Müller, G. (2005): Application of Magnetic Fields in Industrial Growth of Silicon Single Crystals. P roceedings of the Joint 15th Riga and 6th Pamir International Conference, Jurmula, June 2005

Baake, E. (2005): Neue Marktchancen durch innovativen Stromeinsatz im Prozesswärmebereich. elektrowärme international 63 (2005) H. 1, S. 14-19

Baake, E.; Umbrashko, A.; Jakovics, A.; (2005): Numerical modelling of metallurgical processes using LES. Archives of Electrical Engineering Vol. LIV (2005) No. 4, pp.433-445

Baake, E.; Umbrashko, A.; Jakovics, A.; (2005): Numerical modelling of metallurgical processes using LES. Proceeding of the 9th International Conference on Research Works in Electrotechnology and Applied Informatics REI´05, Katowice, Kraków, Poland, August 31 – September 3, 2005, pp. 91-98

Dadzis, K.; Muiznieks, A.; Ratnieks, G.; Riemann, H.; Lüdtke, A (2005): Influence of HF EM Forces and Marangoni Forces on the Melt Flow During FZ Silicon Crystal Growth. Proceedings of the Joint 15th Riga and 6th Pamir International Conference, Jurmula, June 2005

Jakovics, A.; Javaitis, I.; Nacke B.; Baake, E. (2005): Simulation of Melting Process in cold and inductor crucible. Proceedings of the Joint 15th Riga and 6th Pamir International Conference Fundamental and Applied MHD, Riga Jurmala, June 27 – July 1, 2005, Vol. 2, pp. 15-18

Kasjanow, H.; Nikanorov, A.; Nacke, B.; Behnken, H.; Franke, D.; Seidl, A. (2005): Numerische Simulation des EFG -- Folienziehens. DGKK- Arbeitskreis: Angewandte Simulation in der Kristallzüchtung (4. Workshop), 3.-4. November 2005, Heigenbrücken

Kirpo, M.; Jakovics, A.; Baake, E. (2005): Characteristics of velocity pulsations in turbulent recirculated melt flow. MAGNETOHYDRODYNAMICS Vol. 41 (2005), No. 2, pp. 199-210

Kirpo, M.; Jakovics, A.; Baake, E.; Nacke, B. (2005): Modelling velocity pulsations in turbulent recirculated melt flow. Proceeding of the Joint 15th Riga and 6th Pamir International Conference Fundamental and Applied MHD, Riga Jurmala, June 27 – July 1, Vol. 1, 2005 pp. 171-174

Kirpo, M.; Jakovics, A.; Umbrashko, A; Baake, E.; Nacke, B. (2005): Simulation of low-frequency velocity oscillations in turbulent recirculated MHD flows. Proceeding of the International Conference on Actual Problems of Induction Heating APIH-05, St. Petersburg, 25-26 May 2005, pp. 145-152

Krauze, A.; Muiznieks, A.; Gorbunov, L.; Pedchenko, A.; Sattler, A. (2005): Numerical Modeling of 2D Axisymmetric Flow under the influence of AC or DC EM Fields for Industrial CZ Single-Crystal Silicon Growth facilities. Proceedings of the Joint 15th Riga and 6th Pamir International Conference, Jurmula, June 2005

Kudryash, M.; Behrens, R.; Nacke, B. (2005): Induction Skull Melting of Oxides and Glasses, Proceedings of the International Conference REI-05, Katowice, September 2005

Langejürgen, M.; Nacke, B. (2005): Elektromagnetisch induzierte Seigerung von Gussbauteilen. Workshop Elektroprozesstechnik, TU Ilmenau, September 2005

Mühlbauer, A. (2005): Short History of Induction Heating and Melting. Proceedings of the International Conference, Actual Problems of Induction Heating APIH-05, St. Petersburg 2005

Nacke B.; Langejürgen, M. (2005): Elektromagnetisch induzierte Seigerung von Gussbauteilen. Elektrowärme International, Vulkan-Verlag Essen, Dezember 2005 (4), S. 181-184

Nacke, B. (2005): Innovative Anwendungen der Induktionserwärmung. 56. Berg- und Hüttenmännischer Tag, Kolloquium 6: Innovationen bei Thermoprozessen, BA Freiberg, Juni 2005

Nacke, B. (2005): Power und Stirring Control of Skull Melting Procerss for Oxides amd Göasses- , Proceedings of the 2nd Sino-German Workshop on EPM, Dresden, October 2005

Nacke, B.; Behrens, T.; Kudryash, M.; Jakovics, A. (2005): Skull Melting Technology for Oxides and Glasses. Proceedings of the Joint 15th Riga and 6th Pamir International Conference, Jurmula, June 2005

Nacke, B.; Frishfelds, V.; Jakovics, A. (2005): Stability Conditions in Inductive Melting of Oxides in Inductor-Crucible Furnace. Proceedings of the Joint 15th Riga and 6th Pamir International Conference, Jurmula, June 2005

Nacke, B.; Wrona, E. (2005): Design of Complex Induction Hardening Problems by the Use of Numerical Simulation. Proceedings of the International Conference APIH05, St. Petersburg, May 2005

Nacke, B.; Wrona, E. (2005): Design of Complex Induction Hardening Problems ba the Use of Numerical Simulation. Proceedings of the International Conference REI-05, Katowice, September 2005

Nacke, B.; Wrona, E. (2005): Auslegung von Härteprozessen für komplexe Werkstückgeometrien mittels 3D-Simulation. Workshop Elektroprozesstechnik, TU Ilmenau, September 2005

Rudevics, A.; Muiznieks, A.; Ratnieks, G. (2005): Transient Modeling of FZ Crystal Growth Process and Automatic Adjusting of the HF Inductor current and feed rod velocity. Proceedings of the Joint 15th Riga and 6th Pamir International Conference, Jurmula, June 2005

Schülbe, H.; Nacke, B. (2005): Numerical Design of Industrial Transverse Flux Heaters. Proceedings of the International Conference, Actual Problems of Induction Heating APIH-05, St. Petersburg 2005

Umbrashko, A.; Baake, E.; Nacke, B.; Jakovics, A. (2005): Experimental investigations and numerical modelling of the melting process in the cold crucible. Compel: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 24, No.1, 2005 pp. 314-323

Umbrashko, A.; Baake, E.; Nacke, B.; Kirpo, M.; Jakovics, A. (2005): Improvement of the cold crucible melting process using LES modelling. Proceedings of the Joint 15th Riga and 6th Pamir International Conference Fundamental and Applied MHD, Riga Jurmala, June 27 – July 1, 2005, Vol. 2, pp. 23-26