Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 alle Jahre

Baake, E. (2012): Untersuchung und Optimierung des Betriebsverhaltens von Induktionsrinnenöfen durch Anwendung der Computersimulation, Giesserei 99, 08/2012. S. 97-100.

Baake, E.; Nacke, B. (2012): Reduction of CO2 using efficient melting and heating technologies. Proceedings of XVII, International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Baake, E.; Ubbenjans, B. (2012): Potentials for Saving Energy and CO2-Emission through the use of EPM Technologies, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing, pp.679-682

Baake, E.; Ubbenjans, B.; De Keulenaer, H.; Van Reusel, K. (2012): The scope for electricity & carbon saving in the EU through the use of EPM technologies, Proceedings of the XVII UIE Congress Energy efficient, economically sound, ecologically respectful, educationally enforced electrotechnologies. St. Petersburg, Russia, 21-25 May 2012, pp. 215-222

Blinov, K.; Nikanorov, A.; Nacke, B.; Klöpzig, M. (2012): Numerical simulation and investigation of induction through-heaters in dynamic operation mode, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Bressan, F.; Forzan, M.; Lupi, S.; Nikanorov, A.; Nacke, B. (2012): Analysis and numerical simulation of forced cooling in induction coils with high current density, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Dötsch, E.; Nacke, B.; Hegeler, H. (2012): Chapter 2.1 Melting, Handbook of Thermoprocessing Technologies Volume I Fundamentals - Processes - Calculations (Editors Beneke, Nacke, Pfeifer) Vulkan-Verlag Essen, 2012, p. 30 – 57

Galunin, S.; Blinov, Yu.; Nikanorov, A.; Nacke, B. (2012): Numerical modelling and optimization of induction systems for disk heating, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

J. Neumeyer; H. Schülbe; B. Nacke (2012): Hybridprozesse in der Elektroprozesstechnik, elektrowärme international, Ausgabe 3/2012

Jakovics, A.; Pavlovs, S.; Bosnyaks, D.; Spitans, S.; Baake, E.; Nacke, B. (2012): Influence of channel and yoke design and clogging on turbulent flow and heat exchange in induction channel furnaces, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Kichigin, V.; Pozniak, I.; Pechenkov, A.; Schlesselmann, D.; Nacke, B. (2012): Direct solidification of multicrystalline silicon in cold crucible, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Muratov, A.; Galunin, S.; Blinov, Yu.; Orlov, A.; Nacke, B. (2012): Numerical investigation of methods to control temperature field in induction systems for heating by rotation, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Nacke, B.; Baake, E. (2012): Chapter 5 Electrothermal Processes, Handbook of Thermoprocessing Technologies Volume I Fundamentals - Processes - Calculations (Editors Beneke, Nacke, Pfeifer) Vulkan-Verlag Essen, 2012, p. 244 – 316

Nacke, B.; Baake, E. (2012): Recent applications and development trends of electrothermal technologies in metallurgical processes, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Nacke, B.; Baake, E. (2012): Recent applications and future development trends in electromagnetic processing of metals and non-metallic materials, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Nacke, B.; Niemann, B.; Schlesselmann, D. (2012): Wärme- und Stofftransport beim induktiven Skull-Schmelzen von Gläsern und Oxiden, Workshop Elektroprozesstechnik, Technische Universität Ilmenau, September 06 – 07, 2012

Nacke, B.; Niemann, B.; Schlesselmann, D. (2012): Simulation of 3D heat and mass transfer in glass and oxide melts using the inductive skull melting technology, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Nacke, B.; Wipprecht, S. (2012): Tempus Project 511086 P4ER PhD education in energy efficient electtrotechnologies at Russian universities, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Neumeyer, J.; Schülbe, H. (2012): Hybridverfahren mit integrierter Induktionserwärmung, Vortrag auf FOGI-Seminar, Hannover, April 2012

Neumeyer, J.; Schülbe, H.; Nacke, B. (2012): Hybrid-Verfahren in der Elektroprozesstechnik, Elektrowärme international (2012) Heft 3, S. 77 - 80

Neumeyer, J.; Schülbe, H.; Nacke, B. (2012): Hybrid processes in electrotechnology, HEAT PROCESSING, Vol.: 10, Issue 4, 2012, p. 63 – 66

Neumeyer, J.; Schülbe, H.; Nacke, B. (2012): Hybrid-Verfahren in der Elektroprozesstechnik. Workshop Elektrozesstechnik, Workshop Elektrozesstechnik, Technische Universität Ilmenau, September 06 – 07, 2012

Nikanorov, A.; Nacke, B.; Lee, D.; You, J. (2012): Numerical simulation for investigation and design of steel strip induction heating lines for rolling mills, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Nikanorov, A.; Nacke, B.; Lee, D.; You, J. (2012): Numerical simulation for investigation and design of steel strip induction heating lines for rolling mills, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Pavlovs, S.; Jakovics, A.; Baake, E.; Nacke, B. (2012): LES long-term analysis of particles transport in melt turbulent flow for industrial induction channel furnaces, Proceedings of 8th International Conference on Clean Steel, May 14-16, 2012, Budapest, Hungary

Pavlovs, S.; Jakovics, A.; Bosnyaks, D.; Baake, E.; Nacke, B. (2012): Turbulent flow, heat and mass exchange in industrial induction channel furnaces with various channel design, iron yoke position and clogging, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Pesteanu, O.; Baake, E. (2012): New method and devices for electromagnetic drip- and leakage-free levitation melting, ISIJ Int. 52 (2012) No. 5, pp. 937–938

Pesteanu, O.; Baake, E. (2012): New methods and devices for the electromagnetic levitation melting of metals, Proceedings of the XVII UIE Congress Energy efficicent, economically sound, ecologically respectful, educationally enforced electrotechnologies. St. Petersburg, Russia, 21-25 May 2012, pp. 33-40

Pesteanu, O.; Baake, E.; Köppen, A.; Lohan, D. (2012): Two-frequency method and devices for drip- and leackage-free electromagnetic levitation melting, Heat Processing, No. 2 2012, pp. 96-100.

Pfeifer, H.; Baake, E.; Nacke, B. (2012): Chapter 6 Energy Balances and Energy Efficiency for Industrial Furnaces, Handbook of Thermoprocessing Technologies Volume I Fundamentals - Processes - Calculations (Editors Beneke, Nacke, Pfeifer) Vulkan-Verlag Essen, 2012, p. 318 – 362

Pfeifer, H.; Nacke, B. (2012): Chapter 1 Introduction, Handbook of Thermoprocessing Technologies Volume I Fundamentals - Processes - Calculations (Editors Beneke, Nacke, Pfeifer) Vulkan-Verlag Essen, 2012, p. 2 – 27

Scepanskis, M.; Jakovics, A.; Brics, M.; Baake, E.; Nacke, B. (2012): Simulaiton of growth and transportation of solid inclusions in induction furnaces, Proceedings of 8th International Conference on Clean Steel May 14-16, 2012, Baduapest, Hungary

Scepanskis, M.; Jakovics, A.; Nacke, B.; Baake, E. (2012): Numerical analysis and experimental verfification of the behavior of solid inclusions in induction crucible furnaces, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Schlesselmann, D.; Jestremski, M.; Nacke, B.; Rodman, D. (2012): Numerical simulation methods for complex induction hardening processes, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia

Spitans, S.; Jakovics, A.; Baake, E.; Nacke, B. (2012): Numerical modeling of free surface dynamics of melt in an alternate electromagnetic field, Proceedings of 7th international conference on Electromagnetic Processing of Materials EPM 2012, October 22 – 26, 2012, Beijing

Spitans, S.; Jakovics, A.; Baake, E.; Nacke, B. (2012): Numerical modeling of free surface dynamics of melt in alternate electromagnetic field, Proceedings of XVII. International UIE congress, May 21-25, 2012, St. Petersburg, Russia