Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 alle Jahre

Baake, E. (2013): Potentials for saving energy in Europe by the use of electrothermal technologies, heat processing, No. 4, 2013, pp. 69-74

Baake, E. (2013): Industrial applications of process control and monitoring systems, Chapters 1.1 - 1.4 of Tempus book Optimization and control systems in electrotechnologies. Tempus Project 511086, Intensive Course Specific III, St. Petersburg 2013, ISBN 978-5-7629-1408-6 (English) and ISBN 978-5-7629-1420-8 (Russian), p. 8 - 33

Baake, E. (2013): Induction tube welding and heat treatment of tubes, Chapter 5 of Tempus book Induction heating technologies Tempus Project 511086, Intensive Course Specific I, St. Petersburg 2013, ISBN 978-5-7629-1404-8 (English) and ISBN 978-5-7629-1414-7 (Russian), p. 113 - 131

Baake, E. (2013): High frequency tube generators and magnetrons, Chapter 3.3 of Tempus book Power supplies - Mathematical simulation and optimization. Tempus Project 511086, Intensive Course Basic II, St. Petersburg 2013, ISBN 978-5-7629-1402-4 (English) and ISBN 978-5-7629-1414-7 (Russian), p. 57 - 66

Baake, E.; Jakovics, A. (2013): Untersuchung und Verbesserung des Betriebsverhaltens von Induktionsrinnenöfen durch Anwendung der Computersimulation, GIESSEREI 100, Heft 7, 2013, S. 42 - 47

Baake, E.; Nikanorov, A.; Timofeyev, V. (2013): MHD technology in melting and casting production of aluminium alloys, Chapter 2 of Tempus book MHD technologies in metallurgy. Tempus Project 511086, Intensive Course Specific IV, St. Petersburg 2013, ISBN 978-5-7629-1410-9 (English) and ISBN 978-5-7629-1422-2 (Russian), p. 17 - 30

Baake, E.; Pleshivtseva, Y. (2013): Systems of control of electrotechnological processes and installations, Chapter 4.5 of Tempus book Power supplies - Mathematical simulation and optimization. Tempus Project 511086, Intensive Course Basic II, St. Petersburg 2013, ISBN 978-5-7629-1402-4 (English) and ISBN 978-5-7629-1402-4 (Russian), p. 226 - 269

Baake, E.; Spitans, S.; Jakovics, A. (2013): New technology for electromagnetic levitation melting of metals, Proceedings of the International Conference on Heating by Electromagnetic Sources (HES-13) Padua / Italy, May 21-24, 2013, pp.Addendum 1-8

Baake, E.; Ubbenjans, B. (2013): Einsparung von Energie und CO2 durch elektrothermische Technologien, elektrowärme international 71 (2013) H. 2, S. 91-95.

Barba di, P.; Pleshivtseva, Yu.; Rapaport, E.; Forzan, M.; Lupi, S.; Sieni, E.; Nacke, B.; Nikanorov, A. (2013): Multi-objektive optimization for advanced design of induction through heaters, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 507 - 514

Blinov, K.; Nikanorov, A.; Nacke, B. (2013): Numerical simulation and investigation of electromagnetic and thermal dynamics for induction through heaters, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 609 – 614

Geza, V.; Nacke, B.; Baake, E.; Jakovics, A. (2013): Study of thermal stratification in EM force driven turbulent flow in square-shaped crucible for directional solidification method, Proceedings of the 17th International Conference on Crystal Growth and Epitaxy (ICCGE-17) Warsaw, Poland, August 11 - 16

Kichigin, V. (2013): Control front melt crystallization with continuous-sequence zone melting in an induction furnace with cold crucible

Muratov, A.; Galunin, S.; Blinov, Yu.; Nikanorov, A.; Nacke, B. (2013): Numerical simulation of induction systems for heating by rotation with controlled temperature distribution, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 371 - 376

Nacke, B. (2013): (Editor): Power Supplies – Mathematical Simulation and Optimization, Tempus Project 511086, Intensive Course Basic II, St. Petersburg 2013, ISBN 978-5-7629-1402-4 (English) and ISBN 978-5-7629-1414-7 (Russian)

Nacke, B. (2013): (Editor): Induction Heating Technologies, Tempus Project 511086, Intensive Course Specific I, St. Petersburg 2013, ISBN 978-5-7629-1404-8 (English) and ISBN 978-5-7629-1416-1 (Russian)

Nacke, B. (2013): (Editor): Theory and Practice of Application of Arc Furnaces, Tempus Project 511086, Intensive Course Specific II, St. Petersburg 2013, ISBN 978-5-7629-1406-2 (English) and ISBN 978-5-7629-1406-2 (Russian)

Nacke, B. (2013): (Editor): Optimization and Control Systems in Electrotechnologies, Tempus Project 511086, Intensive Course Specific III, St. Petersburg 2013, ISBN 978-5-7629-1408-6 (English) and ISBN 978-5-7629-1420-8 (Russian)

Nacke, B. (2013): (Editor): MHD Technologies in Metallurgy, Tempus Project 511086, Intensive Course Specific IV, St. Petersburg 2013, ISBN 978-5-7629-1410-9 (English) and ISBN 978-5-7629-1422-2 (Russian)

Nacke, B. (2013): Semiconductor converters for medium and high frequency, Chapter 3.2 of Tempus book Power Supplies – Mathematical Simulation and Optimization. Tempus Project 511086, Intensive Course Basic II, St. Petersburg 2013, ISBN 978-5-7629-1402-4 (English) and ISBN 978-5-7629-1414-7 (Russian)

Nacke, B. (2013): Induction heating of metallic strips, sheets and slabs, Induction heating of metallic strips, sheets and slabs. Chapter 2 of Tempus book Induction Heating Technologies. Tempus Project 511086, Intensive Course Specific I, St. Petersburg 2013, ISBN 978-5-7629-1404-8 (English) and ISBN 978-5-7629-1416-1 (Russian)

Nacke, B.; Baake, E. (2013): Elektrothermische Verfahren, Handbuch Industrielle Wärmetechnik (Hrsg.: Pfeifer), Vulkan Verlag Essen, 2013, S. 265 - 330

Nacke, B.; Baake, E. (2013): Institute of Electrotechnology of the Leibniz Universität Hannover (ETP), HEAT PROCESSING, Vol.: 11, Issue 2, 2013, p. 121 – 128

Nacke, B.; Niemann, B.; Schlesselmann, D. (2013): Wärme- und Stofftransport beim induktiven Schmelzen von Gläsern und Oxiden, Elektrowärme international, 71. Jahrgang, Heft 1, S. 71 - 76

Nacke, B.; Niemann, B.; Schlesselmann, D. (2013): Heat and mass transfer in inductive skull melting of glasses and oxides, HEAT PROCESSING, Vol.: 11, Issue 2, 2013, p. 109 – 114

Neumeyer, J.; Schülbe, H. (2013): Hybridverfahren mit integrierter Induktionserwärmung, Vortrag auf FOGI-Seminar, Hannover, Februar 2013

Nikanorov, A.; Baake, E.; Brauer, H.; Weil, C. (2013): Approaches for numerical simulation of high frequency tube welding process, Proceedings of the International Conference on Heating by Electromagnetic Sources (HES-13) Padua / Italy, May 21-24, 2013, pp. 647-654

Pavlovs, S.; Jakovics, A.; Bosnyaks, D.; Nacke, B.; Baake, E. (2013): Anomalies of joule heat, thermal and turbulent flow fields in clogging industrial channel induction furnaces, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 29 - 36

Scepanskis, M.; Jakovics, A.; Baake, E.; Nacke, B. (2013): Experimental and LES-based Euler-Lagrange numerical investigation of the particle laden EM induced recirculated turbulent flow class, Proceedings of 8th International Conference on Multiphase Flow, Jeju, Korea, May 2013

Schlesselmann, D.; Nacke, B. (2013): Anwendungen der numerischen Simulation des induktiven Randschichthärtens, Elektrowärme international, 71. Jahrgang, Heft 3, S. 89 – 94

Schlesselmann, D.; Nacke, B. (2013): Aktuelle Entwicklungen und Anwendungen des induktiven Randschichthärtens am ETP, Workshop Elektroprozesstechnik, Technische Universität Ilmenau, September 12 – 13, 2013

Schlesselmann, D.; Nikanorov, A.; Nacke, B.; Galunin, S.; Schön, M.; Yu, Z. (2013): Numerical calculation and comparison of temperature profiles and martensite microstructures in induction hardening processes, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 127 - 134

Schülbe, H.; Nacke, B. (2013): Einsatz der induktiven Erwärmung beim Warmformprozess, Workshop Elektrozesstechnik, TU Ilmenau, September 12-13

Spitans, S.; Baake, E.; Jakovics, A. (2013): Coupled electromagnetic and hydrodynamic calculation of free surface dynamics and turbulent flow for induction melting applications, Proceedings of the XV International Conference "Complex Systems: Control and Modeling Problems". Samara / Russia, June 25-28, 2013

Spitans, S.; Baake, E.; Jakovics, A. (2013): A new approach for coupled simulation of liquid metal flow, free surface dynamics and electromagnetic field in induction furnaces, elektrowärme international 71 (2013) H. 4, S. 55-61

Spitans, S.; Baake, E.; Jakovics, A.; Nacke, B. (2013): Numerical Modeling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field: Part 1. Implementation and Verification of Model, Metallurgical and Materials Transactions B: Volume 44, Issue 3 (2013), pp. 593 - 605

Spitans, S.; Baake, E.; Nacke, B.; Jakovics, A. (2013): Development, verification and application of numerical model for coupled free surface and liquid metal flow calculation in EM field978-88-89884-25-6, p. 279 - 286, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 279 - 286

Tucs. A.; Spitans, S.; Jakovics, A.; Baake, E.; Nacke, B. (2013): Implementation and verification of numerical model for gas bubble dynamics in electroconductive fluid, Proceedings of International Symposium on Heating by Electromagnetic Sources, Padua, Italy, May 21 – 24, 2013, ISBN 978-88-89884-25-6, p. 623 – 630