Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Elektroprozesstechnik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 alle Jahre

Baake, E.; Beneke, F. (2015): Energieeffizienz in der industriellen Prozesstechnik. Prozesswärme – Energieeffizienz in der industriellen Thermoprozesstechnik, Vulkan-Verlag Essen, 2015, S. 29 - 36.

Beneke, F.; Nacke, B.; Pfeifer, H. (2015): Handbook of Thermoprocessing Technologies Volume II Plants - Components - Safety, Vulkan Verlag, Essen, 2015

Dietrich, A.; Schülbe, H.; Nacke, B. (2015): Detailed 3-D numerical investigation of continuous longitudinal flux heating for thin strips, Proceedings of 8th international conference on Electromagnetic Processing of Materials EPM 2015, October 12 – 16, 2015, Cannes, pp. 557-560

Filimonov, A.; Naberezhnov, A.; Koroleva, E.; Rudskoy, A.; Nacke, B.; Kichigin, V.; Nizhankovskii, V. (2015): Production of magnetic alkali boronsilicate glasses by an induction melting, Metal Science and Heat Treatment 3/2015, 56 (11-12), pp. 681-684

Franz, H.; Baake, E.; Biebricher, U.; Flinspach, J.; Hohmann, M.; Morche, C.; Nacke, B.; Reiter, G.; Zimmermann; A. (2015): Silicon Crystallization and Silicon Refining for Photovoltaic Applications, Proceedings of the Liquid Metal Processing & Casting Conference, 20-24 September 2015, Leoben (Austria)

Geza, V.; Nacke, B. (2015): Electromagnetic sodium pump with core-free double stator, Journal Nuclear Engineering and Design, 2015 (submitted)

Geza, V.; Nacke, B.; Baake, E.; Jakovics, A. (2015): Anisotropy of flow and transition between mixing regimes in physical model of directional solidification, Magnetohydrodynamics 51 (2015), No. 1, pp. 15 - 24.

Jakovics, A.; Pavlovs, S.; Baake, E.; Steinberg, T.; Sushkovs, V.; Tatulcenkovs, A. (2015): Numerical study of gas bubbles collective dynamics in the melt influenced with magnetic field, Proceedings of the 8th International Conference on Electromagnetic Processing of Materials EPM 2015, October 12-16 2015, Cannes, France, pp. 183-186.

Musaeva, D.; Ilin, V.; Baake, E.; Geza, V. (2015): Numerical simulation of the melt flow in an induction crucible furnace driven by a Lorentz force pulsed at low frequency, Magnetohydrodynamics 51 (2015), No. 4, pp. 771 – 784.

Nacke, B.; Baake, E. (2015): Institut für Elektroprozesstechnik der Leibniz Universität Hannover, Elektrowärme international 73 (2015) H. 2, S. 109-117.

Nacke, B.; Baake, E. (2015): Electrothermal Processes. Handbook of Heat Processing, Vulkan-Verlag Essen, 2015, pp. 261-326

Nacke, B.; Kichigin, V.; Geza, V. (2015): Continuous melting and pouring of an aluminium oxide based melt with cold crucible, Proceedings of 8th international conference on Electromagnetic Processing of Materials EPM 2015, October 12 – 16, 2015, Cannes, pp. 11-14

Nacke, B.; Neumeyer, J.; Schülbe, H. (2015): Control of induction assisted hybrid-welding processes to join heavy-walled steel components, Proceedings of International Conference “Complex system: Control and modeling problems” CSCMP 2015, June 22-25, 2015, Samara, Russia

Nikanorov, A.; Nacke, B.; Zedler, T. (2015): Design optimization of induction heater in planetary reactors for semiconductor industry, Proceedings of 7th International Scientific Conference of Young Scientists on Electrical Engineering, Electrotechnology, Energy, Novosibirsk, Russia, June 9 - 12, 2015

Pavlovs, S.; Jakovics, A.; Sushkovs, V.; Nacke, B. (2015): LES study of heat transfer in the melt for metallurgical MHD devices with power supply by inductor and over electrodes, Journal Magnetohydrodynamics 02/2015 51(1), pp. 67 - 82

Pavlovs, S.; Jakovics, A.; Sushkovs, V.; Nacke, B. (2015): Numerical study of turbulent flow and thermal field in industrial electrotechnological devices with combined power supply. simulation for investigation and design of steel strip induction heating lines for rolling mills, Proceedings of 8th international conference on Electromagnetic Processing of Materials EPM 2015, October 12 – 16, 2015, Cannes, pp. 147-150

Pleshivtseva, Yu.; Korshikov, S.; Wipprecht, S.; Makarov, E.; Baake, E.; Nacke, B. (2015): Simulation of primary heating stage in resource efficient forging chain, Heat Processing, Vol.: 13, Issue 1, 2015, pp 85-90.

Pleshivtseva, Yu.; Nacke, B.; Popov, A. (2015): Optimization of induction heating regarding typical quality criteria: Problem solution based on 2D FEM analysis, Applied Mechanics and Materials Vol. 792 (2015) pp. 462-467

Pleshivtseva, Yu.; Rapoport, E.; Nacke, B.; Nikanorov, A. (2015): Multi-Objective Optimization of Induction Heaters Design: Problem Solution by Means of Alternance Method - Проблемы управления и моделирования в сложных системах, XVII Международная конференция, 22.-25. June 2015, Самарский научный центр РАН, 2015, pp. 427-432

Rinnhofer, H.; Baake, E.; Trauzeddel, D. (2015): Energiesparpotenzial beim induktiven Schmelzen und Erwärmen von Metallen durch Verringerung der Spulenverluste - Teil 2. Prozesswärme – Energieeffizienz in der industriellen Thermoprozesstechnik, Vulkan-Verlag Essen, 2015, S. 361 - 365.

Rinnhofer, H.; Baake, E.; Trauzeddel, D. (2015): Energiesparpotenzial beim induktiven Schmelzen und Erwärmen von Metallen durch Verringerung der Spulenverluste - Teil 1. Prozesswärme – Energieeffizienz in der industriellen Thermoprozesstechnik, Vulkan-Verlag Essen, 2015, S. 353 - 360.

Scepanskis, M.; Jakovics, A.; Baake, E.; Nacke, B. (2015): Molten salts cannot be used for the study of turbulent electromagnetically driven flows of liquid meta, Metallurgical and Materials Transactions B: , Volume 46B, October 2015

Scepanskis, M.; Jakovics, A.; Baake, E.; Nacke, B. (2015): A model for homogenization of solid alloying admixtures in an induction crucible furnace, Steel Research International 86 (2015) No. 2, pp. 169-174

Scepanskis, M.; Jakovics, A.; Kaldre, I.; Holweger, W.; Nacke, B. (2015): A hypothesis on the electromagnetic cause of white etching cracks in bearing steel, Proceedings of STLE conference, Dallas, May 17-21, 2015

Schlesselmann, D.; Nacke, B.; Nikanorov, A. (2015): Calculation and optimization of temperature and microstructure in induction surface hardening, Proceedings of International Conference “Complex system: Control and modeling problems” CSCMP 2015, June 22-25, 2015, Samara, Russia

Schlesselmann, D.; Nacke, B.; Nikanorov, A.; Galunin, S. (2015): Coupled numerical multiphysics simulation methods in induction surface hardening, VI. Proceedings of Int. Conf. on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2015, May 2015, Venice

Schlesselmann, D.; Yu, Z.; Dalinger, A., Nacke, B. (2015): Neue Anwendungsbereiche numerischer Simulation beim induktiven Randschichthärten mit Feldkonzentratoren, HTM J. Heat Treatm. Mat. 70 (2015), Nr. 1, S. 40-49

Spitans, S.; Baake, E.; Jakovics, A. (2015): Electromagnetic levitation melting of metals on a large scale: simulation and experiments, Proceedings of the 8th International Conference on Electromagnetic Processing of Materials EPM 2015, October 12-16 2015, Cannes, France, pp. 583-586.

Spitans, S.; Baake, E.; Jakovics, A.; Franz, H. (2015): Numerical simulation of electromagnetic levitation in a cold crucible furnace, Magnetohydrodynamics 51 (2015), No. 3, pp. 567 – 578.

Spitans, S.; Baake, E.; Nacke, B.; Jakovics, A. (2015): New technology for large scale electromagnetic levitation melting of metals, Magnetohydrodynamics 51 (2015), No. 1, pp. 121 – 132.

Spitans, S.; Baake, E.; Nacke, B.; Jakovics, A. (2015): Numerical Modeling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field. Part II: Conventional Electromagnetic Levitation, Metallurgical and Materials Transactions B: , 2015, published online: 16 November 2015.

Steinberg, T.; Baake, E. (2015): Adaption and verification of numerical models for gas bubbles dynamics in electroconductive fluid, Proceedings of the 8th International Conference on Electromagnetic Processing of Materials EPM 2015, October 12-16 2015, Cannes, France, pp. 449-452.

Wipprecht, S.; Baake, E. (2015): Entwicklung und Optimierung eines Erwärmungsverfahrens für das ressourceneffiziente Schmieden, Elektrowärme international 73 (2015) H. 1, S. 65-69.

Wipprecht, S.; Baake, E.; Nacke, B.; Pleshivtseva, Yu.; Korshikov, S. (2015): Simulation and optimisation of heating stages in a new resource efficient forging process chain, Int. J. Microstructure and Materials Properties (IJMMP), Vol. 9 (2), 2015, pp.1-16.