Publikationen des Instituts für Elektroprozesstechnik

Zeige Ergebnisse 21 - 40 von 368

2021


Dzelme V, Jakovics A, Baake E. Electromagnetic forming of a liquid metal layer. in Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc. 2021. S. 77-84
Dzelme V, Jakovics A, Baake E. Liquid metal layer dynamics in transverse alternating magnetic field. in Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3. 2021
Ebel W. Numerische Modellierung und Design des induktiven Schweißprozesses von plattierten Rohren. Garbsen: TEWISS Verlag, 2021. 127 S. (Institut für Elektroprozesstechnik).
Ennen M, Nacke B, Baake E. Dynamische Querfelderwärmung: Erzeugung maßgeschneiderter Temperaturfelder in Flachstählen. in Prozesswärme . 2021. 00543_2021_01_05
Ennen M, Thie S, Schmitz N, Baake E, Hauch J, Pfeifer H. Maßgeschneiderte Bauteilerwärmung für die Massivumformung: Ein Vergleich zwischen direkten und indirekten Erwärmungsverfahren. in Massivumformung. Institute of Electrical and Electronics Engineers Inc. 2021. S. 56 – 61
Ennen M, Niedzwiecki I, Baake E. Tailored heating of billets for hot forming using an induction heating approach. in Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3. 2021
Guglielmi M, Smolyanov I, Vencels J, Baake E. Investigation of an electromagnetic stirring process by parallel numerical simulations in Ansys Fluent and OpenFoam. in Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc. 2021. S. 142-147
Guglielmi M, Baake E, Niedzwiecki I, Sufis N. Optimization of an electromagnetic stirring process by pulsed travelling magnetic field. in Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc. 2021. S. 19-24
Shvydkiy E, Smolyanov I, Baake E. Simulation of binary alloy columnar solidification in presence of EM driven flow. in Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc. 2021. S. 54-58
Smolyanov I, Shmakov E, Baake E. Comparison of numerical approaches and techniques to simulate MHD duct flows. in Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. 2021. S. 197-202
Smolyanov IA, Shmakov EI, Baake E, Guglielmi M. Verification of the code to calculate duct flow affected by external magnetic field. Computational Continuum Mechanics. 2021 Sep 30;14(3):322-332. doi: 10.7242/1999-6691/2021.14.3.27

2020


Dzelme V, Jakovics A, Baake E. Liquid metal free surface deformation in electrically induced vertical flow. Magnetohydrodynamics. 2020;56(1):67-74. doi: 10.22364/mhd.56.1.6
Fehling T, Baake E. Electromagnetic and chemical numerical coupling method in bubbly liquid metal flows for optimization of carbon dioxide free production of hydrogen. Magnetohydrodynamics. 2020 Sep 1;56(2-3):289-297. doi: 10.22364/mhd.56.2-3.20
Fehling T. Multiphysikalische Modellierung von Flüssigmetall-Zweiphasenströmungen unter Einfluss elektromagnetischer Felder. Garbsen: TEWISS Verlag, 2020. 211 S.
Nacke B, Baake E. The Institute of Electrotechnology of the Leibniz University Hannover. Heat processing special. 2020;64-71.
Shvydkiy E, Köppen D, Baake E. Liquid Metal Flow Under Traveling Magnetic Field—Solidification Simulation and Pulsating Flow Analysis. Metals. 2020 Apr 20;10(4):532. doi: 10.3390/met10040532
Spitans S, Franz H, Baake E. Numerical Modeling and Optimization of Electrode Induction Melting for Inert Gas Atomization (EIGA). Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 2020 Okt;51(5):1918-1927. Epub 2020 Aug 10. doi: 10.1007/s11663-020-01934-5
Steinberg T, Baake E, Kollenberg W, Schultz KM, Leonhardt A, Kräusel V et al. Additive manufactured magnetic flux concentrators for induction heating applications. International Journal of Applied Electromagnetics and Mechanics. 2020 Jul 8;63(S1):S31-S39. doi: 10.3233/JAE-209119
Thie S, Hauch J, Schmitz N, Pfeifer H, Ennen M, Baake E. Untersuchung einer gezielten Bauteilerwärmung für die Massivumformung. Prozesswärme. 2020;2020(4):38-45.

2019


Baake E, Spitans S, Jakovics A. Analysis and design of induction liquid metal processes using advanced numerical modelling. in 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP): Proceedings. Institute of Electrical and Electronics Engineers Inc. 2019. S. 14-24. 8976777 doi: 10.1109/CSCMP45713.2019.8976777