Forschung
Publikationen

Publikationen des Instituts für Elektroprozesstechnik


Zeige Ergebnisse 41 - 60 von 723
First 1 2 3 4 5 6 7 Last

2019


Pleshivtseva Y, Rapoport E, Nacke B, Nikanorov A, Di Barba P, Forzan M et al. Design and control of electrotechnological systems: A multi-objective optimization approach. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2019 Dez 19;39(1):239-247. doi.org/10.1108/COMPEL-11-2019-0454, doi.org/10.1108/COMPEL-11-2019-0454

Politova G, Ganin M, Kaminskaya T, Mikhailova A, Nacke B, Filimonov A et al. Low-temperature magnetostriction and distortions in the rare-earth Laves phases. Journal of Physics: Conference Series. 2019 Nov 28;1389(1). 012097. doi.org/10.1088/1742-6596/1389/1/012097

Politova G, Kaminskaya T, Mikhailova A, Ganin M, Alekseeva O, Vanina P et al. Magnetocaloric and structural studies of substituted Tb0.2Dy0.8-xGdxCo0.9Al0.1 laves phases alloys. Key Engineering Materials. 2019 Jun 11;806:136-141. doi.org/10.4028/www.scientific.net/KEM.806.136

Schulze M, Nikanorov A, Nacke B. Hierarchical shape optimization of one-sided transverse flux heating induction coil. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2019 Nov 23;39(1):73-80. doi.org/10.1108/COMPEL-05-2019-0214

Schulze M, Baake E. Tailored heating of forging billets using induction and conduction heating approaches. COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 39 No. 1. 2019 Dez 16;39(1):100 - 107. doi.org/10.1108/compel-05-2019-0217

Shvydkiy E, Baake E. Three-Dimensional Numerical Model of a Double-Sided Electromagnetic Stirrer of a Traveling Magnetic Field. in Proceedings: 2019 XXI International Conference "Complex Systems: Control and Modeling Problems" (CSCMP) . Institute of Electrical and Electronics Engineers Inc. 2019. S. 249-251. 8976552 doi.org/10.1109/CSCMP45713.2019.8976552

Spitans S, Franz H, Baake E. Numerical modelling and optimization of the electrode induction melting for inert gas atomization (EIGA). in Proceedings of the 11th PAMIR International Conference: Fundamentals and Applied MHD. 2019. S. 327-331

Wetzel G, Krügener J, Peibst R, Dietrich A, Nacke B, Jörg Osten H-J. Simulation of solar cell performance based on in the field measured ambience parameters. in Dubois S, Glunz S, Verlinden P, Rolf B, Weeber A, Hahn G, Poortmans M, Ballif C, Hrsg., SiliconPV 2019 - 9th International Conference on Crystalline Silicon Photovoltaics. American Institute of Physics Inc. 2019. 020020. (AIP Conference Proceedings). doi.org/10.1063/1.5123825

Wetzel G, Krügener J, Peibst R, Dietrich A, Nacke B, Osten H-J. Simulation of solar cell performance based on in the field measureed ambience parameters. in SiliconPV 2019, the 9th International Conference on Crystalline Silicon Photovoltaics: Leuven, Belgium, 8-10 April 2019. Melville: AIP Publishing LLC. 2019. 020020. (AIP Conference Proceedings).


2018


Arafat Z, Fehling T, Kleiss G, Nacke B. Application of rechargeable batteries of electrical vehicles as time dependent storage resource for the public electricity grid. Energy Procedia. 2018 Nov 27;155:478-491. doi.org/10.1016/j.egypro.2018.11.032

Baake E, Pleshivtseva Y. Editorial. International Journal of Microstructure and Materials Properties. 2018;13(1/2):1-3.

Baake E. Energieeffizienz von elektrothermischen Verfahren. in Praxishandbuch Thermoprozesstechnik: Band 1: Grundlagen - Prozesse - Verfahren. 3. Auflage Aufl. Band 1. Essen: Vulkan Verlag. 2018. S. 396-398

Baake E. Grundlagen der induktiven Erwärmung. Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018;2018(2):107-109.

Baake E. Induktives Schmelzen von Eisen- und Nichteisenwerkstoffen. Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018;2018(7):77-80.

Baldan M, Nikanorov A, Nacke B. Hierarchical optimization approaches in designing surface hardening induction systems. in 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. 1 Aufl. Band 424. Bristol: IOP Publishing Ltd. 2018. 012067. (IOP Conference Series: Materials Science and Engineering). doi.org/10.1088/1757-899X/424/1/012067

Baldan M, Steinberg T, Baake E. Optimal design of inductor addressed to a tailored heating forging process. International Journal of Microstructure and Materials Properties. 2018 Jul 12;13(1-2):39-53. doi.org/10.1504/IJMMP.2018.093281

Baldan M, Steinberg T, Baake E. Self-adaptive multimethod optimization applied to a tailored heating forging process. in VIII International Scientific Colloquium on Modelling for Materials Processing 21–22 September 2017, Riga, Latvia. 2018. 012016. (IOP Conference Series: Materials Science and Engineering). doi.org/10.1088/1757-899X/355/1/012016

Dietrich A, Nacke B. Numerical investigation of effects on blanks for press hardening process during longitudinal flux heating. in VIII International Scientific Colloquium on Modelling for Materials Processing 21–22 September 2017, Riga, Latvia. 2018. 012014. (IOP Conference Series: Materials Science and Engineering). doi.org/10.1088/1757-899X/355/1/012014

Dzelme V, Jakovics A, Vencels J, Köppen D, Baake E. Numerical and experimental study of liquid metal stirring by rotating permanent magnets. in 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. Band 424. 2018. 012047. (IOP Conference Series: Materials Science and Engineering). doi.org/10.1088/1757-899X/424/1/012047

Dzelme V, Jakovics A, Chudnovsky A, Baake E. Simulation of electrically induced vortical flows. in 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. Band 424. IOP Publishing Ltd. 2018. (IOP Conference Series: Materials Science and Engineering). doi.org/10.1088/1757-899X/424/1/012083


Zeige Ergebnisse 41 - 60 von 723
First 1 2 3 4 5 6 7 Last