Publikationen des Instituts für Elektroprozesstechnik

Zeige Ergebnisse 701 - 720 von 792

1999


Raming G, Muiznieks A, Mühlbauer A. Numerical modelling of the influence of different types of magnetic fields on fluid motion and resistivity profiles during FZ silicon crystal growth. in Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga: University of Latvia. 1999. S. 24-29
Ratnieks G, Muiznieks A, Raming G, Mühlbauer A, Buligins L. 3D modelling of magnetic, temperature, hydrodynamic and dopant concentration fields during FZ silicon crystal growth. in Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga: University of Latvia. 1999. S. 30-35
Ratnieks G, Muiznieks A, Buligins L, Raming G, Mühlbauer A. 3D numerical analysis of the influence of EM and marangoni forces on melt hydrodynamics and mass transport during FZ silicon crystal growth. Magnetohydrodynamics. 1999;35(3):223-236. doi: 10.22364/mhd
Ruhnke A, Nauvertat G, Mühlbauer A. Anwendung der induktiven Querfelderwärmung von Flachgut. Stahl und Eisen. 1999;119(8):73-77.
Ruhnke A. Systematische Untersuchung der induktiven Querfeld-Banderwärmung. Düsseldorf: VDI-Verl, 1999. 148 S. (Fortschritt-Berichte VDI / Verein Deutscher Ingenieure. Reihe 19, Wärmetechnik, Kältetechnik).
Ruhnke A. Systematische Untersuchung der induktiven Querfeld-Banderwärmung. 1999. 148 S.
Ruhnke A, Mühlbauer A, Nikanorov A, Demidovitch V. Thermal deformation of the strip during transverse flux induction heating. in Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga: University of Latvia. 1999. S. 210-215
Ruhnke A, Mühlbauer A, Nikanorov A, Demidovitch V. Thermal deformation of the strip during transverse flux induction heating. in International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF'99, September 23 - 25, 1999, Pavia, Italy. Pavia. 1999. S. 525
Virbulis J, Wetzel T, Muiznieks A, Raming G, Rexer B, Dornberger E et al. Numerical modelling of melt flow during Czochralski Silicon crystal growth. in Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga: University of Latvia. 1999. S. 42-47

1998


Baake E, Nauvertat G. Reduction of Electromagnetic Stray-Fields in the Surrounding of Industrial Induction Installations by Optimized Design. in Heat treating: including the 1997 International Induction Heat Treating Symposium : proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, 15 - 18 September 1997, Indianapolis, Indiana. Ohio: ASM International. 1998
Demidovitch V, Nikanorov A, Lupi S, Dughiero F, Ruhnke A, Mühlbauer A. Methods and Tools for All-Round Optimization of Transverse-Flux Induction Heaters. in Heat treating: including the 1997 International Induction Heat Treating Symposium : proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, 15 - 18 September 1997, Indianapolis, Indiana. Ohio: ASM International. 1998
Fricke DH. Automatische Anpaßschaltung für Mikrowellengeneratoren. 1998. 137 S.
Lüdge A, Riemann H, Schröder W, Mühlbauer A, Muiznieks A, Raming G. Experimental confirmation of a numerical model of doping distribution for floating-zone silicon growth with the needle eye technique. in Silicon materials science and technology: proceedings of the Eighth International Symposium on Silicon Materials Science and Technology. Pennington: Electrochemical Society, Inc. 1998
Mühlbauer A, Börgerding R, Drewek R, Jörn KU. Improvement of Scale Reduction in Induction Heaters for Forging. in Heat treating: including the 1997 International Induction Heat Treating Symposium : proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, 15 - 18 September 1997, Indianapolis, Indiana. Ohio: ASM International. 1998
Mühlbauer A, Muiznieks A, Raming G, Riemann H, Lüdge A. Numerical modelling of the microscopic inhomogenities during FZ-silicon-growth. in Crystal growth 1998: proceedings of the 12th International Conference on Crystal Growth and the 10th International Conference on Vapor Growth and Epitaxy, Jerusalem, Israel, July 26 - 31, 1998. Amsterdam: North-Holland Publ Co. 1998
Mühlbauer A, Muiznieks A, Raming G, Panschow R. Numerische Simulation von nichtlinearen Induktionserwärmungsanlagen mit automatischer Leistungsregelung. in Workshop Automatisierung in der Elektrotechnologie: 24.-25. Sept. 1998. Ilmenau. 1998
Nauvertat G, Baake E, Krahlisch M, Nacke B, Köhler D. Magnetische Streufelder in der Umgebung von Induktionsanlagen. Elektrowärme international (EWI). 1998;56(B2):61-68.
Nikanorov A. International Induction Heating Seminar IHS-98. Elektrowärme international (EWI). 1998;56(B4):177-179.
Sonnenschein P. Systematische Beratung zum optimierten Einsatz industrieller Elektroprozeßwärmeanlagen im Wettbewerbsmarkt. Düsseldorf: VDI-Verl, 1998. 127 S. (Fortschrittberichte der VDI-Zeitschriften. Reihe 16, Technik und Wirtschaft).
Sonnenschein P. Systematische Beratung zum optimierten Einsatz industrieller Elektroprozeßwärmeanlagen im Wettbewerbsmarkt. 1998. 127 S.

Zeige Ergebnisse 701 - 720 von 792