Numerical investigation of effects on blanks for press hardening process during longitudinal flux heating

verfasst von: André Dietrich, Bernard Nacke
Abstract: With the induction heating technology, it is possible to heat up blanks for the press hardening process in 20 s or less. Furthermore, the dimension of an induction system is small and easy to control in comparison to conventional heating systems. To bring the induction heating technology to warm forming industry it is necessary to analyze the process under the view of induction. This paper investigates the edge- and end-effects of a batch heated blank. The results facilitate the later design of induction heating systems for the batch process.
Organisationseinheit(en): Institut für Elektroprozesstechnik
Typ: Aufsatz in Konferenzband
Publikationsdatum: 08.05.2018
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Allgemeine Materialwissenschaften, Allgemeiner Maschinenbau
Elektronische Version(en): https://doi.org/10.1088/1757-899X/355/1/012014 (Zugang: Offen)

BibTeX

@inproceedings{a33a3e477c2d470da69d9325fb5f6be8,
title = "Numerical investigation of effects on blanks for press hardening process during longitudinal flux heating",
abstract = "With the induction heating technology, it is possible to heat up blanks for the press hardening process in 20 s or less. Furthermore, the dimension of an induction system is small and easy to control in comparison to conventional heating systems. To bring the induction heating technology to warm forming industry it is necessary to analyze the process under the view of induction. This paper investigates the edge- and end-effects of a batch heated blank. The results facilitate the later design of induction heating systems for the batch process.",
author = "Andr{\'e} Dietrich and Bernard Nacke",
note = "Funding information: The research project Series-production of inductively heated blanks for hot sheet metal forming (IFG-No. 18738 N) from the Research Association for steel Application (FOSTA) and the Research Association of Automotive Technology (FAT) is supported by the Federal Ministry of Economic Affairs and Energy through the German Federation of Industrial Research Associations (AiF) as part of the program for promoting industrial cooperative research (IGF) on the basis of a decision by the German Bundestag.; 8th International Scientific Colloquium on Modelling for Materials Processing ; Conference date: 21-09-2017 Through 22-09-2017",
year = "2018",
month = may,
day = "8",
doi = "10.1088/1757-899X/355/1/012014",
language = "English",
series = "IOP Conference Series: Materials Science and Engineering",
publisher = "IOP Publishing Ltd.",
booktitle = "VIII International Scientific Colloquium on Modelling for Materials Processing 21–22 September 2017, Riga, Latvia",
}