Research
Publications

Publications of the Institute of Electrotechnology

Showing results 61 - 80 out of 756

2019


Nacke B, Baake E. The Institute of Electrotechnology of the Leibniz University Hannover. Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2019;2019(2):117-124.
Pleshivtseva Y, Rapoport E, Nacke B, Nikanorov A, Di Barba P, Forzan M et al. Design and control of electrotechnological systems: A multi-objective optimization approach. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2019 Dec 19;39(1):239-247. doi: 10.1108/COMPEL-11-2019-0454
Politova G, Ganin M, Kaminskaya T, Mikhailova A, Nacke B, Filimonov A et al. Low-temperature magnetostriction and distortions in the rare-earth Laves phases. Journal of Physics: Conference Series. 2019 Nov 28;1389(1):012097. Epub 2019 Nov 28. doi: 10.1088/1742-6596/1389/1/012097, 10.15488/9396
Politova G, Kaminskaya T, Mikhailova A, Ganin M, Alekseeva O, Vanina P et al. Magnetocaloric and structural studies of substituted Tb0.2Dy0.8-xGdxCo0.9Al0.1 laves phases alloys. Key Engineering Materials. 2019 Jun 11;806:136-141. doi: 10.4028/www.scientific.net/KEM.806.136
Schubotz S. Untersuchung und Optimierung der Lebensdauer von Hochleistungsinduktoren für das induktive Härten. Garbsen: TEWISS Verlag, 2019.
Schulze M, Nikanorov A, Nacke B. Design of Transverse Flux Induction Coils by using a Successive Optimization Strategy. In 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF 2019: Proceedings. Institute of Electrical and Electronics Engineers Inc. 2019. 9097053 doi: 10.1109/isef45929.2019.9097053
Schulze M, Nikanorov A, Nacke B. Hierarchical shape optimization of one-sided transverse flux heating induction coil. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2019 Nov 29;39(1):73-80. doi: 10.1108/COMPEL-05-2019-0214
Schulze M, Baake E. Tailored heating of forging billets using induction and conduction heating approaches. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2019 Dec 16;39(1):100 - 107. doi: 10.1108/compel-05-2019-0217
Shvydkiy E, Baake E. Three-Dimensional Numerical Model of a Double-Sided Electromagnetic Stirrer of a Traveling Magnetic Field. In 2019 XXI International Conference "Complex Systems: Control and Modeling Problems" (CSCMP): Proceedings. Institute of Electrical and Electronics Engineers Inc. 2019. p. 249-251. 8976552 doi: 10.1109/CSCMP45713.2019.8976552
Spitans S, Franz H, Baake E. Numerical modelling and optimization of the electrode induction melting for inert gas atomization (EIGA). In Proceedings of the 11th PAMIR International Conference: Fundamentals and Applied MHD. 2019. p. 327-331
Wetzel G, Krügener J, Peibst R, Dietrich A, Nacke B, Jörg Osten H-J. Simulation of solar cell performance based on in the field measured ambience parameters. In Dubois S, Glunz S, Verlinden P, Rolf B, Weeber A, Hahn G, Poortmans M, Ballif C, editors, AIP Conference Proceedings: SiliconPV 2019 - 9th International Conference on Crystalline Silicon Photovoltaics. 1. ed. Leuven: American Institute of Physics Inc. 2019. 020020. (AIP Conference Proceedings). doi: 10.1063/1.5123825
Wetzel G, Krügener J, Peibst R, Dietrich A, Nacke B, Osten H-J. Simulation of solar cell performance based on in the field measureed ambience parameters. In SiliconPV 2019, the 9th International Conference on Crystalline Silicon Photovoltaics: Leuven, Belgium, 8-10 April 2019. Melville: AIP Publishing LLC. 2019. 020020. (AIP Conference Proceedings).

2018


Arafat Z, Fehling T, Kleiss G, Nacke B. Application of Rechargeable Batteries of Electrical Vehicles as Time Dependent Storage Resource for the Public Electricity Grid. Energy Procedia. 2018 Nov;155:478-491. Epub 2018 Nov 27. doi: 10.1016/j.egypro.2018.11.032, 10.15488/5166
Baake E, Pleshivtseva Y. Editorial. International Journal of Microstructure and Materials Properties. 2018;13(1/2):1-3.
Baake E. Energieeffizienz von elektrothermischen Verfahren. In Praxishandbuch Thermoprozesstechnik: Band 1: Grundlagen - Prozesse - Verfahren. 3. Auflage ed. Vol. 1. Essen: Vulkan Verlag. 2018. p. 396-398
Baake E. Grundlagen der induktiven Erwärmung. Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018;2018(2):107-109.
Baake E. Induktives Schmelzen von Eisen- und Nichteisenwerkstoffen. Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018;2018(7):77-80.
Baldan M, Nikanorov A, Nacke B. Hierarchical optimization approaches in designing surface hardening induction systems. In 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. 1 ed. Vol. 424. Bristol: IOP Publishing Ltd. 2018. 012067. (IOP Conference Series: Materials Science and Engineering). doi: 10.1088/1757-899X/424/1/012067
Baldan M, Steinberg T, Baake E. Optimal design of inductor addressed to a tailored heating forging process. International Journal of Microstructure and Materials Properties. 2018 Jul 25;13(1-2):39-53. doi: 10.1504/IJMMP.2018.093281
Baldan M, Steinberg T, Baake E. Self-adaptive multimethod optimization applied to a tailored heating forging process. In VIII International Scientific Colloquium on Modelling for Materials Processing 21–22 September 2017, Riga, Latvia. 2018. 012016. (IOP Conference Series: Materials Science and Engineering). doi: 10.1088/1757-899X/355/1/012016